MGI JETvarnish 3D One

MGI JETVARNISH 3D One Presse numérique 3D

  • Productivité élevée avec impression en un seul passage
  • Dispositif d'embellissement numérique haut de gamme avec une vitesse allant jusqu'à 2,077 feuilles A3 par heure
  • Technologie jet d'encre UV associée aux têtes d'impression piézoélectriques pour une qualité élevée  
  • AIS SmartScanner pour l'enregistrement automatique de feuille à feuille
  • Suite logicielle incluse qui vous permet de suivre vos travaux, de gérer votre file d'attente de travaux, de créer des bons de travail, de rappeler des réimpressions et d'ajuster votre scanner AIS dans un seul outil simple et intuitif
  • Vernis sur impression offset et numérique avec et sans plastification qui rend vos flux de travail très flexibles
  • Épaisseur de vernis variable entre 21 et 116 microns pour des effets tactiles 2D et 3D en un seul passage
  • Séchoir à LED écologique pour un environnement sans ozone
MGI JETvarnish 3D One

Découvrez la JetVarnish 3D One en vidéo

Points forts

Points forts

Points forts

Il est temps d’offrir à vos clients plus de valeur et de créativité dans vos travaux imprimés ! La JETVARNISH 3D One transforme vos impressions en produits spectaculaires et irrésistibles qui attireront immédiatement l'attention de vos clients. Mettez en évidence des zones définies, ajoutez facilement des effets 3D et proposez à vos clients des produits uniques et une expérience sensorielle tactile sans précédent.

MGI JETvarnish 3D One

Caractéristiques & Téléchargements

Caractéristiques & Téléchargements
PRODUCT SPECIFICATIONS – JETVARNISH 3D ONE
Printing technology MGI’s exclusive inkjet engine technology; Drop-on-Demand (DoD)
technology; Piezoelectric printheads,developed and manufactured
by Konica Minolta; Single pass printing; Flexible & scalable printing
architecture
Coating thicknesses Depending on your file, the inks used and the type of surface of
your sheet, the coating thickness can vary. On laminated and
aqueous coating: 21 μm – 116 μm for 3D raised effects and tactile
finish. On toner and coated paper: 30 μm – 116 μm for 3D raised
effects and a tactile finish
Production speed In 2D/flat mode: Up to 2,077 A3 sheets per hour (with 21 μm)
In 3D/raised mode: Up to 1,260 A3 sheets per hour (with 51 μm)
Up to 547 A3 sheets per hour (with 116 micron)
Registration SmartScanner coupled with Artificial Intelligence (AIS) for fully
real-time automated sheet-to-sheet registration process. No crop
marks required.
Formats Min. 21 x 29.7 cm
Max. 36.4 x 76.0 cm
Max. Printable Width 35.3 cm
Substrate thickness Min: 135 g/m2 and not less than 150 μm or 6 mil before printing
& lamination; Max: 450 g/m2 and not more than 450 μm or
18 mil before printing & lamination; Motorized height-adjustment
print heads
Substrates* Printing on most matte or glossy laminated surfaces, with or
without aqueous coating, layered paper, plastic, PVC and other
coated materials.
Varnish on toner Spot 3D One coat directly onto most digital prints with no
lamination or coating required.
UV coatings and capacity varnish delivered with a 10-litre tank capacity
High capacity
Automatic feeder
Feeder able to handle a paper pile up to 30 cm;
2,500 sheets at 135 g/m2
Paper Tray Tray able to handle a paper pile up to 15 cm or approximately
1,250 sheets at 135 g/m2
All paper formats from A4 up to 36.4 x 75 cm
Paper path 100 % flat paper path; Vacuum feed system; Air feed system;
Automatic double sheet detection; In-line LED dryer; “On-the-fly”
drying & curing via integrated LED
Maintenance &
remote technical
support
Daily maintenance completed in less than 10 minutes; Majority of
procedures are automated; Automatic cleaning system; From cold
start to production in less than 10 minutes; Remote troubleshooting
& support via included video/web camera (high speed internet
connection required)
Operator panel Integrated user-friendly LCD touch-screen
Dimensions (L x W x H) 4.02** x 1,41 x 1,80; 1 metre clearance required on all 4 sides
Weight ± 1,200 kg
Electrical
requirements
V: 220-240V 50-60Hz; A: 20; plug: 2 plugs CEE 17 IP44 32A (32A
250V, 1P+N+PE); RCD 30mA; C curve 32A breaker
Operating Temperature: 18 to 30°C
Environment Relative humidity: between 30 – 55% (no condensation)
Respecting the
environment
Eliminates resource waste (wasted electricity, paper and varnish);
No plates (offset) or screens (screen printing); No cleanup or preparation
between jobs; Drastic reduction in amount of consumables
and use of bulk packaging; Coating without volatile solvent.
Options Automatic PDF File Converter; VDP barcode camera;
AIS SmartScanner Lighting for metallized substrates

The default sheet format is A3, unless otherwise stated
1) with an additional option installed
2) speed will vary according to printing parameter used
3) confirm substrate/toner compability with KM
* The used substrate needs to be either coated or laminated.
Otherwise the media is absorbing the varnish and the desired effect might get lost.
** No paper extensions available.
 

  • All specifications refer to A4-size paper of 135 gsm quality.
  • The support and availability of the listed specifications and functionalities varies depending on operating systems, applications and network protocols as well as network and system configurations.
  • The stated life expectancy of each consumable is based on specific operating conditions such as page coverage for a particular page size (5% coverage of A4). The actual life of each consumable will vary depending on use and other printing variables including page coverage, page size, media type, continuous or intermittent printing, ambient temperature and humidity.
  • Some of the product illustrations contain optional accessories.
  • Specifications and accessories are based on the information available at the time of printing and are subject to change without notice.
  • Konica Minolta does not warrant that any prices or specifications mentioned will be error-free.
  • All brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.

Complétez le formulaire ci-dessous pour en savoir plus !